This high power 3-cell Lipo works well with many small to medium size park flyers, and is a good choice for aerobatic and 3D models where maximum output at minimum weight is desired
11.1 volt 1300 mah 50C Lipo Specifications:
Dimensions: 2.80 x 1.37 x 0.87 inches (71mm x 35mm x 22mm)
Weight: 3.84 ounces (109 grams)
Output: up to 65 amps continous
Charge rate: Maximum 2C (2.6 amps) We recommend a charge rate of 1C (1.3 amps)for maximum battery life.
Connectors: A T-Plug connector is installed. The balance connector is the JST XH series 4 pin with 2.5mm pin spacing. This balance connector is also used on 3E Model, Align, BatteryHobby, Common Sense RC version 2, DualSky, Dynam, Electric Power, Esky, Fully Max, GE Power, Great Planes Electrify, Hextronic, HiModel, Hobby Loong, Horizon E-flite, Imax, Mega Power, Mystery, Parkzone, Protek, RadicalRC, Rhino, Turborix, Vampower, Venom, Walkera, X-Caliber, and Zippy Lipos. This list is subject to revision, and we do not guaranty it's accuracy. If you find an error on this list, please contact us.
Please read and observe all safety precautions provided with this battery before using or charging. This battery must only be charged with a battery charger designed for Lithium Polymer batteries. Never charge this battery at a rate greater than 2C (2.6 amps). Always charge Lipo batteries on a fireproof surface, and never leave unattended while charging.
Lithium Polymer batteries hold a large amount of energy and must be respected. Discharging or charging at an improper rate will cause excessive heat which can damage the battery, or even cause a fire! Your use of this product means that you accept full responsibility for any consequences.