This 4-cell Lipo battery is a good choice for use with the Multiplex Funjet, EDF Jets and medium to large park flyers.
This Lipo works great for 40 to 50 size models when two of them are hooked together with a Parallel XT60 Battery Harness. Connecting two of these batteries in parallel results in an 14.8v 4400 mah 50C 220 amp Lipo!
14.8v 2200 mah 50C Lipo Specifications:
Dimensions: 4.0 x 1.3 x 1.2 inches (101.6 x 33 x 30.5 mm)
Weight: 8.3 ounces (236 grams)
Output: 110 amps continuous, up to 220 amp burst
Charge rate: Up to 2C (4.4 amps). We recommend a fast charge rate of 2C (4.4 amps), and a normal charge rate of 1C (2.2 amps) for longest battery life.
Connectors: An XT60 connector is installed. The balance connector is the JST XH series 5 pin with 2.5mm pin spacing. This balance connector is also used on 3E Model, Align, BatteryHobby, Common Sense RC version 2, DualSky, Dynam, Electric Power, Esky, Fully Max, GE Power, Great Planes Electrify, Hextronic, HiModel, Hobby Loong, Horizon E-flite, Imax, Mega Power, Mystery, Parkzone, Protek, RadicalRC, Rhino, Turborix, Vampower, Venom, Walkera, X-Caliber, and Zippy Lipos. This list is subject to revision, and we do not guaranty it's accuracy. If you find an error on this list, please contact us.
Please read and observe all safety precautions provided with this battery before using or charging. This battery must only be charged with a battery charger designed for Lithium Polymer batteries. We recommend charging this battery at 1C (2.2 amps) for longest life. Always charge Lipo batteries on a fireproof surface, and never leave unattended while charging.
Lithium Polymer batteries hold a large amount of energy and must be respected. Discharging or charging at an improper rate will cause excessive heat which can damage the battery, or even cause a fire! Your use of this product means that you accept full responsibility for any consequences.