This 4-cell Lipo is a good choice for use in high speed planes and EDF powered Jets.
Connecting two of these batteries in parallel with our Parallel Battery Harness results in a 14.8v 5200 mah 50C 260 amp Lipo!
14.8v 2600mah 50C Lipo Specifications:
Dimensions: 4.75 x 1.25 x 1.25 inches
Weight: 9.90 ounces (280.660 grams)
Output: 130 amps continuous, 260 amps burst
Connectors: A T-Plug connector is installed. The balance connector is the JST XH series 4 pin with 2.5mm pin spacing. This balance connector is also used on 3E Model, Align, BatteryHobby, Common Sense RC version 2, DualSky, Dynam, Electric Power, Esky, Fully Max, GE Power, Great Planes Electrify, Hextronic, HiModel, Hobby Loong, Horizon E-flite, Imax, Mega Power, Mystery, Parkzone, Protek, RadicalRC, Turborix, Vampower, Venom, Walkera, X-Caliber, and Zippy Lipos. This list is subject to revision, and we do not guaranty it's accuracy. If you find an error on this list, please contact us.
Please read and observe all safety precautions provided with this battery before using or charging. This battery must only be charged with a battery charger designed for Lithium Polymer batteries. Never charge Lithium Polymer batteries at a rate greater than 1C. This means that this Lipo MUST NOT be charged at a rate greater than 2600 milliamps (2.6 amps). Always charge Lipo batteries on a fireproof surface, and never leave unattended while charging.
Lithium Polymer batteries hold a large amount of energy and must be respected. Discharging or charging at an improper rate will cause excessive heat which can damage the battery, or even cause a fire! Your use of this product means that you accept full responsibility for any consequences.