Shopping Cart

0 item(s) in cart/ total: $0    view cart
Emax 12g ES08MDII Digital Metal Gear Sub-Micro Servo

Emax 12g ES08MDII Digital Metal Gear Sub-Micro Servo

review
5
0
5
Your Price: $7.25
In Stock.50
Part Number:G-188
help
*We'll ask for shipping info at checkout
The Emax ES08MD Digital Metal Gear servo is similar in size to the Hitec HS-65MG, but with the added benefit of digital performance!  This is one tough, high quality servo, and it comes with four control arms.

The Emax ES08MD has the universal "S" type connector that fits most receivers, including Futaba, JR, GWS, Cirrus, Blue Bird, Blue Arrow, Corona, Berg, Spektrum and Hitec.

The wire colors are Brown-Red-Orange:  Red = battery positive     Brown = battery negative     Orange = signal

5 Stars
Very nice servo
First off I have to say I've always been a major brand buyer went it came to my radio equipment. Emax has changed that thought process since I've started using this ES08MDII servo in a few models. Hard to believe this level of quality for such a low price is possible but I'm really liking these little jewels and will try other larger models in future builds.
Did you find this helpful?  14 of 14 Found Helpful
Reviewed by:  from Philadelphia. on 9/26/2016
5
5 Stars
Mr.
I've stripped at least ten E-flite Timber servos. And a bunch of E-flite Apprentice and Carbon-Z Cub servos too. Ugh. From Horizon they are expensive to replace and they just strip again. I found this servo recommended in rcgroups, couldn't believe it was only $5.50 apiece for metal gear, good torque/speed and being digital, necessary for AS3X stabilization, so I picked up several. It comes with a bunch of arms, so, as I like a lot of rudder throw, I swapped one in for the rudder and the ailerons, now I have serious rudder throw which is great both in the air and on the ground for extreme taxiing, it's been weeks with no stripping or burning out. If you need to reverse the servo and not doing that with the transmitter (EG for AS3X or SAFE gyro correction where you have to reverse the servo itself), HeadsUp sells a cheap EMAX programmer thing. Five stars.
Did you find this helpful?  9 of 10 Found Helpful
Reviewed by:  from Greenwich. on 10/22/2016
5
5 Stars
Customer
I'm VERY happy with these servos. Extremely accurate, fairly quick, durable and cheap! I put them in my scratch built 3d plane (600g flying weight), it now has hours of flight and multiple hard crashes but no servo issues! Also, I've experienced interference/fluttering issues with some other brands. Nothing with the EMAX servos, very stable even when placed right next to each other. If you run 4+ channels I recommend using a voltage protector.
Did you find this helpful?  6 of 7 Found Helpful
Reviewed by:  from Temecula, CA. on 10/31/2016
5
5 Stars
Glider Guy
I have used quite a few of the Emax digital servos of various size in a number of my "Old Timers" and even more so in my RC gliders. I have used a lot of servos over the years and even the most expensive have a problem once in awhile. I may have had one I changed out because of a crack in the case at the servo arm post but by and large at any price these are some of the best servos I have used. They are accurate, center well and have great holding power at neutral. I would rank them right up with many of the more expensive servos, at least the way I use them in gliders. I also am careful with my servos and inspect them regularly...so I don't have crash test experience with them.
Did you find this helpful?  5 of 5 Found Helpful
Reviewed by:  from Holland. on 8/25/2017
5
5 Stars
ES08MD2 12G servo
A very nice and reliable dig/metal servo.These are my favorite mid level servo as i really wish they had a little more torque, more as like 32-34in/oz @ 5v or even a little more than that.but i still use and trust them as is.They seem smooth not jumpy or notchy like some ive run into.Plus they are reasonably priced.I do like these ☆♡ and use them currently in some models.
Did you find this helpful?  3 of 3 Found Helpful
Reviewed by:  from Pittsfield. on 8/21/2017
5
5 Stars
Very accurate and good
The best micro servo. High quality, fast and very accurate.
Did you find this helpful?  2 of 2 Found Helpful
Reviewed by:  from OC. on 1/1/2018
5
5 Stars
Emax MG digital servos work great
Put these digital servos in a new EF Vanquish II pattern plane and wow! Super fast, precise and center well. Overall, very happy with these ES08MDII servos. And for a fraction of the price of the Hitec HS65MG servos - just not as much torque.
Did you find this helpful?  2 of 2 Found Helpful
Reviewed by:  from Lakewood Ranch FL. on 12/27/2017
5
5 Stars
Satisfied customer
Service was prompt And my part arrived in good working order and did as it was intended to
Did you find this helpful?  2 of 2 Found Helpful
Reviewed by:  from Garden Grove. on 10/4/2017
5
5 Stars
Emaxx servos
I have always had good luck with Emaxx servos and expect no less from these, I am still building the plane these are going in so have not bench tested them yet, but I expect to have no problems with them.
Did you find this helpful?  2 of 3 Found Helpful
Reviewed by:  from NY. on 8/4/2017
5
5 Stars
RC enthusiast
Excellent product. Full metal gear, no slop, strong, small and light and a reasonable price. Can't ask for more from a small servo.
Did you find this helpful?  2 of 2 Found Helpful
Reviewed by:  from Westminster. on 7/10/2017
5
5 Stars
owner
this is by far my favorite light servo. its plenty strong for those fast models that pull extreme gs . it is truly a digital servo and when used with the programmer box it can give you all the features you desire
Did you find this helpful?  2 of 2 Found Helpful
Reviewed by:  from niobrara. on 6/30/2017
5
5 Stars
12g Metal servos
They are working great so far. Can't beat the price for the quality
Did you find this helpful?  2 of 2 Found Helpful
Reviewed by:  from Texas. on 6/30/2017
5
5 Stars
Emax servo
My favorite servo. Weighs a bit more than 12g but they work well, no issues.
Did you find this helpful?  2 of 2 Found Helpful
Reviewed by:  from dunedin, fl. on 6/26/2017
5
5 Stars
Mr
Very solid servos with full metal gear train. Good speed and centering and have stood up to some helicopter use with gyros. They have been flawless in my airplanes. I’ve ordered a lot of these and only had one the was DOA...cheap enough it wasn’t worth returning.
Did you find this helpful?  1 of 1 Found Helpful
Reviewed by:  from NC. on 9/1/2018
5
5 Stars
Rc flier
Very tough servo, can’t beat it for price and reliable service! Heads up is the greatest! Unbelievable service, tech support and shipping costs! You just can’t go wrong!
Did you find this helpful?  1 of 1 Found Helpful
Reviewed by:  from Chandler, Az. on 8/11/2018
5
5 Stars
Mr.
I have found these Emax servos to be excellent quality and have not yet had the first problem. And the price can't be beat!
Did you find this helpful?  1 of 1 Found Helpful
Reviewed by:  from Gainesville. on 5/25/2018
5
5 Stars
eMax servos work well
These digital metal servos replace some analog plastic gear servos that jittered the first day I used them. The eMax servos are working flawlessly in my 3d foamie.
Did you find this helpful?  1 of 1 Found Helpful
Reviewed by:  from Indianapolis. on 2/19/2018
5

Related Items

Recently Viewed Items