Shopping Cart

0 item(s) in cart/ total: $0    view cart
Emax CF2822 1000kv Outrunner Brushless Motor

Emax CF2822 1000kv Outrunner Brushless Motor

review
5
0
5
Your Price: $11.50
In Stock.39
Part Number:H-655

Add Stick Mount
Emax Aluminum Stick Mount
Add Prop Saver
3.0mm Prop Saver
Add Collet-Style Prop Adapter
3.0mm Collet-Style Prop Adapter
help
*We'll ask for shipping info at checkout
The Emax CF2822 1000kv is a 1.4 ounce 370 class outrunner brushless motor. It works well on a wide variety of models weighing from 10 to 25 ounces, and is especially well suited for slow flying models, such as the GWS Slow Stick.

We recommend using an 18A to 22A Electronic Speed Control (ESC) with the CF2822 1000kv. The Sky Power 20A ESC with Linear BEC works very well with this motor.

This motor comes without connectors installed.  We suggest using 3.5mm male bullet connectors

To mount a prop, you can use a 3.0mm prop adapter, or 3.0mm prop saver, both sold separately.

This motor comes with a radial firewall mount.  We also sell an aluminum stick mount that will work with this motor:  Emax Aluminum Stick Mount for Motors with 11mm Bearing Tube.


5 Stars
Great
I have the 1300kv version which is unavailable right now. I had to blue locktite the two rear hex screws that hold the motor to the mount as they vibrated loose. Now they're staying put. I cut the shaft 4mm with dremel cutting wheel so that the prop adapter wouldn't stick out that much. The motor runs great on 3s lipo on apc e-prop 8x4. It hauls my 30oz glider upwards briskly. These are great power and lightweight motors and would buy again.
Did you find this helpful?  3 of 3 Found Helpful
Reviewed by:  from Bullhead City, AZ. on 11/16/2017
5
5 Stars
Mr.
Great motor. Flys slow stick fast. Will try 800 KV to slow down.
Did you find this helpful?  3 of 4 Found Helpful
Reviewed by:  from Sparta MI. on 9/26/2016
5
5 Stars
Mr
Purchased Emax CF2822 was identical to the original motor that was damaged. Very little effort to mount and test in plane. Only thing I would recommend is a set of 3mm bullet connects be installed for this item. Otherwise .. great little motor.
Did you find this helpful? 
Reviewed by:  from Lexington. on 3/5/2018
5

Reward Points

1 points will be rewarded to you when you buy this item.

Related Items

Recently Viewed Items