Emax CF2822 1300kv Outrunner Brushless Motor
The Emax CF2822 1300kv is a 1.4 ounce, 180 watt, 370 class outrunner brushless motor that works well on a wide variety of models weighing up to 30 ounces. It will produce about 24 ounces of thrust using a 3 cell Lipo battery and the GWS 8040 prop.
This motor includes a firewall mount, stick mount, prop saver. It does not come with connectors installed, but 3.5mm connectors are sold separately.
We've been using this motor on a GWS Zero, and it's an excellent choice for this light foam model. The CF2822 1300kv easily takes the Zero straight up using an 11.1v 1300 30C Lipo battery and the GWS 8040 prop. For extreme speed, we use the GWS HD8060 prop, and the little Zero really whips by on a low level pass!
We recommend using the HURC 22A ESC with the CF2822 1300kv.
To mount a prop, you can use the included Prop Saver, or purchase a 3mm Prop Adapter.
MOUNTING OPTIONS: A firewall mount and an Aluminum Stick Mount are included. Always check the tightness of all motor set screws and motor mount screws when installing motors. The set screws require a 1.5mm Allen wrench.
Prop Data for Emax CF2822 1300kv Motor:
|3-Cell (11.1v)||GWS EP9050||30 oz.||17 amps*||Exceeds max. amps|
|3-Cell (11.1v)||GWS EP8040||24 oz.||12 amps|
|3-Cell (11.1v)||APC 8 x 4E||25 oz.||14 amps|
|3-Cell (11.1v)||GWS HD8060||22 oz||17 amps*||Exceeds max. amps|
|3-Cell (11.1v)||GWS EP7035||15 oz.||7 amps|
|3-Cell (11.1v)||APC 7 x 6E||19 oz.||12 amps|
|2-Cell (7.4v)||GWS EP1170||21 oz.||15 amps|
|2-Cell (7.4v)||GWS EP1060||18 oz.||12 amps|
|2-Cell (7.4v)||GWS EP1047||19 oz.||13 amps|
|2-Cell (7.4v)||GWS EP9050||16 oz.||10 amps|
|2-Cell (7.4v)||GWS EP8040||12 oz.||6.5 amps|
Please be aware that the battery used can make a tremendous amount of difference in the performance of brushless motors. The above data was obtained using batteries in good condition that were fully charged. Thrust and amp draw may be less with the use of batteries rated at lower amp output, and slightly more using batteries rated for higher amp output. Other factors, such as ESC timing and variations in actual motor KV can affect the performance of brushless motors as well. We recommend the use of a Watt Meter to test the current draw of your particular power system, especially if you plan to use a prop that pushes the motor near it's maximum amp rating.
Emax CF2822 1300kv Specifications:
Weight: 1.4 ounces (39 grams)
Diameter: 1.1 inch (28mm)
Length (excluding shaft): 1.2 inches (30mm)
Shaft Length (exposed): 0.62 inches (15mm)
Shaft Diameter: 3mm
Replacement Shaft = 3mm x 47mm
Bearing Size: 3mm x 8mm x 4mm
Voltage: 7.2 to 12.6
Current: 16 amp maximum for 60 seconds