Shopping Cart

0 item(s) in cart/ total: $0    view cart
Emax GT2218/11 930kv Outrunner Brushless Motor

Emax GT2218/11 930kv Outrunner Brushless Motor

Your Price: $21.95
In Stock.
Part Number:G-147
The Emax GT2218/11 is a 2.8 ounce, 450/480 class, 930KV, 230 watt outrunner brushless motor. It's a good choice for sport planes weighing 20 to 40 ounces, and 3D models weighing 18 to 30 ounces.

The APC 11x5.5E is a good all around prop for this motor, and we suggest that you give it a try for both sport and 3D flying. The APC 10x7E is a good choice for models designed for higher speeds.

We suggest using a 3 cell Lipo battery that is rated for about a 30 amp continuous discharge (or more), such as an 11.1v 1000 30C to 11.1v 2200 50C.

We recommend using a 30A to 40A Electronic Speed Control (ESC) with this motor.

The GT2218/11 comes with 3.5mm male connectors installed, and female connectors are included for your ESC. 

Mounting Options: The GT2218/11 can be mounted in front of a firewall using the included X mount and rotor end prop adapter. It can also be mounted behind a firewall, using the included 4mm prop adapter to mount a prop on the motor shaft.  The GWS Plastic Stick Mount for 28mm Motors can be purchased to mount the GT2218/11 on a 10mm stick.

The replacement shaft for this motor is 4mm x 53mm
The replacement bearings for this motor are 4mm x 8mm x 3mm (front and rear)

Reward Points

2 points will be rewarded to you when you buy this item.

Related Items

 

Recently Viewed Items