Shopping Cart

0 item(s) in cart/ total: $0    view cart
Emax Multirotor 4-in-1 30 Amp x 4 ESC for Quadcopters

Emax Multirotor 4-in-1 30 Amp x 4 ESC for Quadcopters

Your Price: $38.95
In Stock.
Part Number:C-571
The Emax Multirotor 4-in-1 30Ax4 ESC is specially designed for use with quadcopters.  It has been flashed with SimonK software and incorporates four 30 Amp electronic speed controls (ESC) in one compact unit.  The Emax Multirotor 4-in-1 30Ax4 ESC features a main signal cable with BEC lead, which will allow all four ESCs in the unit to be programmed as one, using either a transmitter or program card.  

Each ESC sector on the Emax Multirotor 4-in-1 30Ax4 ESC is labled and includes 3 motor wire ports, and twelve 8" 18 gauge motor wire leads featuring 3.5mm female connectors on one end to which motor wires can be connected, and bare leads at the other end for connection to the ESC ports.  These motor wire leads can be shortened to fit your application; 3.5mm motor wire extensions are also available for lengthening these leads if necessary.  The Emax Multirotor 4-in-1 30Ax4 ESC includes a bare red/black battery lead onto which a battery connector can be soldered; we suggest using a male t-plug for the power leads.  Other electrical connectors are also available in our store.

The Emax Multirotor 4-in-1 30Ax4 ESC can be programmed for the following functions (a full instruction sheet is included with the unit):

1.  Throttle Range

2.  Timing (Low, Mid-Low, Medium, Mid-High, High; default is Medium)

3.  Start Mode (0.03, 0.05, 0.06, 0.09, 0.13, 0.19, 0.25, 0.38, 0.50, 0.75, 1.00, 1.25, 1.50;  default is 0.75)

4.  Thottle Curve Mode (Off, Low, Middle, High; default is Off)

5.  Control Frequency (8KHz and 22KHz; default is 8KHz)

6.  Low-Voltage Cut-off (2.8v/cell, 3.0v/cell, 3.2v/cell; default is 3.0v/cell)

7.  Cut-Off Mode (Soft and Normal; default is Soft)

Related Items

Recently Viewed Items