These high-density Green LED light strips are super bright and easy to use. There are 60 LED's per strip. The strips have adhesive on the back and are flexible, which makes them super easy to attach to airplanes, helicopters, multi-rotor copters, or just about anything for that matter. Every third LED has a connection, so you can cut the strip to your required length and you can even daisy chain different colors together by soldering leads to any positive and negative contact anywhere on the strip.
While these LED lights can be run off a 2 cell (7.4v) lipo battery, they are at their optimum brightness when using a 3 cell (11.1v) lipo battery.
1. Solder the JST Connector Lead - Female Housing to the positive and negative contacts on the LED strip.
2. Connect the JST Connector Lead - Female Housing to a T-Plug/BEC JST Lighting Tap
3. Connect the T-Plug/BEC JST Lighting Tap into your plane's power sytem between the flight battery and ESC.
(battery, ESC, JST Connector Lead and Lighting Tap sold separately)
An alternate method for powering the LED strip is to solder the red (positive) and black (negative) leads of a 3S Female JST/XH 4 Pin 4" Connector to the positive and negative contacts on the LED strip. The LED strip can then be powered through the JST/XH plug of your flight battery.