Hyperion Servo Rate Adjuster (For Retracts and Flaps)
Click To Enlarge
- Item #: D-225
Adjusts the rate of analog servos on flaps and retracts for that great scale function.
The Hyperion Dual Servo Slow is used to slow down the travel speed of up to two R/C servos.
There are two independent servo inputs and outputs. A single tiny adjustable pot is used to select a common speed. The adjustment ranges from about normal speed to a snail's pace (up to about four seconds for end to end travel).
Although it was designed for R/C model aircraft retract applications, the rate reducer is perfect for slowing down servos in other applications.
Maximum Delay: ~4 secs.
Weight: 1.5 grams.
Size: 8 x 49 x 4 mm.
Voltage: 5VDC (4 cell NiMH/NiCD or BEC)
Current Draw: 4mA typical.
Plug one or two servos into the Servo Slow. Plug the servo slow into your R/C receiver (one or two cables). Using a small screwdriver, gently adjust the pot (square part with screwdriver slot) until the desired travel speed is obtained. The single pot provides a common travel speed for both servos.