Power Up 480 Plus 1100kv
I got this motor to replace my FMS Super EZ motor (3610/1050kv) This has just a bit more power 18 watts more on 3s, and amp draw was 20 with 225 watts at WOT with an 11x5 Master Airscrew prop. Mounting holes were perfect, however, the X mount to motor holes were a bit off so one screw would not go in and I needed to shave off about 1mm on the inside of the hole to get the screw to thread properly. Not a big deal to me and I did not contact HeadsUp, but, pretty sure they would have helped to remedy the issue. There is some slight end play, if you hold the shaft it will pull out about 1 to 1.5mm, it performs well so far, only have about 1/2 hour on it, quiet running and smooth. The collet prop adapter works great and slides on the shaft a good 10mm so lots of grip. Happy with it so far, giving it 4 stars only because the X mount motor mount holes were not a good fit but I would recommend this motor. I have read that it is the same as the Turnigy Areodrive which I also own and have been great motors. I have yet to replace one. HeadsUp is a great company with fast shipping and am very happy with there service as well. Would I buy more of these motors? Yes, for the price you can't go wrong and seems to be working well, time will tell.
Reviewed by: Darren Bahlmann from Montana.