The HURC 180 Plus is a 0.35 ounce (10 gram), 2000KV outrunner brushless motor that works well on very small parkflyers, and on models intended to be flown indoors.
The HURC 180 Plus works well on models weighing about 3 to 6 ounces. We suggest using a GWS 5030 prop, and a 7.4v 350 35C or 7.4v 500 35C Lipo battery. The props can be mounted using the included 2mm Prop Saver.
The HURC 180 Plus does not come with connectors installed. 2.0mm Connectors & Shrink Tube may be purchased separately.
Motor Mounting Options: A firewall mount is included with the motor, and we recommend using threadlock on the set screws that secure the motor to the mount. The set screws require a 1.5mm Allen wrench.
Mounting Propellers: This motor comes with a Prop Saver and one o-ring. The GWS 5030 prop fits securely on the Prop Saver. The supplied o-ring is very light, so we recommend purchasing additional o-rings. It may be necessary to use two o-rings to keep the prop from flying off the Prop Saver.