Shopping Cart

0 item(s) in cart/ total: $0    view cart
Leopard 2835/6T 1350KV Outrunner Brushless Motor

Leopard 2835/6T 1350KV Outrunner Brushless Motor

Your Price: $26.95
In Stock.9
Part Number:C-311
The Leopard Power 2835/6T is a 2.4 ounce, 1350kv, 320 watt 450-class outrunner brushless motor that is well suited for planes weighing 25 - 50 ounces.  It is designed for use with 2 and 3 cell lipo batteries.  We recommend using a 40 - 45 amp ESC with this motor.

The Leopard Power 2835/6T motor comes with 3.5mm male bullet connectors installed.  An x-mount is included for mounting the motor to a firewall, and a rotor end prop adapter is included for mounting propellers. 
5 Stars
Leopard 2835/6T 1350KV
After reading the specs, I chose this motor for a 900mm Popwing I wanted to hot rod. With an APC 8x6 prop and a 40A ESC it gives me all kinds of power and speed. The 2200mah lipo puts the CG right where it belongs. I couldn't be happier with this motor.
Did you find this helpful?  5 of 5 Found Helpful
Reviewed by:  from Michigan. on 7/2/2017
5 Stars
Test Pilot
Great motor! I mount it behind the firewall Make it strong; with the right prop this motor will pull itself completely off the firewall! Connectors are 3.5mm and must be changed to match the 4mm connectors on a 45A ESC. I use a 2200mA, 30C battery.
Did you find this helpful?  2 of 2 Found Helpful
Reviewed by:  from California. on 10/24/2017
5 Stars
Great Motor
Placed this motor in a my design for a 3D printed flying wing, AUW of 2lbs 5oz. 330 watts with a 8x6APC - plenty of power on a 3S 2200, good speed and vertical capability
Did you find this helpful?  1 of 1 Found Helpful
Reviewed by:  from Ocala, FL. on 9/6/2018
5 Stars
I now have 5 of these leopard motors in various sizes and I love all of them. They are all very solid and well made not to mention considerably more powerful than EFlite motors of the same or similar size. I purchased this one for a 49" Sig Rascal that I purchased which came from the factory back in the day powered by a brushed motor and speed controller. I first tried a Turnigy brushless outrunner but needed more. Than I tried an EFlite Park 450 that I had laying around and wasn't happy with that either. So I ordered a Leopard from HeadsUpRC and I am powering it with a 3S Lipo and a 45amp Skypower ESC with switchmode BEC also from HeadsUpRC. The motor is swinging a 9x6 slow flyer prop and I could not be happier with this combination. Next time I do a motor swap, I will skip the trial and error and go straight for another Leopard, they have never done me wrong, and their value is nothing short of amazing.
Did you find this helpful? 
Reviewed by:  from Omaha Nebraska. on 9/9/2018

Reward Points

2 points will be rewarded to you when you buy this item.

Related Items


Recently Viewed Items