T-Plug BEC/Lighting Tap with JST Connector

1 Review(s) Write a Review
On sale: $2.95 $0.85
Part Number: A-245
Availability: In Stock.
Use this handy gadget to tap into your main battery pack to power lights or an external BEC.  

The connector consists of a male t-plug connection (for a battery) and a female t-plug connection (for an ESC), with a wire lead spliced in to the battery side of the plug, and terminating in a female JST connector.

Our 3 Amp and 5 Amp UBECs come with a male JST connector that connects directly to the female JST connector of this adapter. The BEC is then connected to an open channel on the receiver, and the ESC is connected to the throttle channel of the receiver.  (refer to illustration below)

*When using a UBEC, always remember to disable the red wire on the cable leading from your ESC to the receiver.  

Related Items

XT30 Male to XT60 Female Adapter
$2.95 $1.50 Sale
In Stock.
Replacement Motor Shaft - 3.0mm x 42.0mm
$1.95 $0.50 Sale
In Stock.

Recently Viewed Items